How to Replace Your Jeep Air Filter

The air filter in your rig cleans all of the air that gets in to your engine.  This filter needs to be changed either every 20,000 miles or once a year.  That is, unless you have an Airaid filter.  If you have one of the premium Airaid filters then you will just need to wash it and then put it back in.  If you happen to drive in conditions that are sandy or dusty then you will need to do this on a more frequent basis.  Dirty air filters can cause you to lose up to 3 mpg depending on how you drive.  This means that by keeping the air filter in your Jeep clean, you can save up to 100 gallons of fuel each year!

Changing or cleaning your air filter can also cause there to be less of a strain on your engine.  They are easy to change too as there are essentially just three steps.  First you will need to open the casing for the air filter.  Then take out the old one and put the new one in.  Now close the casing and you are ready to roll!

Any part of your rig that takes in air or fluids from the outside environment needs to have a way to separate what will benefit your rig from what will not.  This is the whole reason for having fuel and air filters.  While these parts do require you to check and change them on a regular basis, they are one of the least expensive and easiest – as well as the most critical – maintenance type procedures that you can perform on your Jeep.  Changing the air filter in your Jeep on a regularly scheduled basis can significantly impact both the performance and the life of your engine.

Basic changing of a filter does not take very long at all – about 3 minutes.  It doesn’t cost a lot of money either.  This can send your Jeep down the trails renewed and refreshed.  Having an air filter that is clogged can cause our Jeep to exhibit poor performance as well as reducing the life of the engine.  Taking 5 minutes out of your day once a year can change all of that. 

Now, in all honesty you can take your rig to your local oil change shop and they can change it for you.  Why pay them to do this though when it is so easy to do it yourself?  Even a 5 year old can do this!  When you get someone else to do this for you they can charge up to $30!  That’s ridiculous!

Anyway, the next time you change your filter, replace your old one with an Airaid filter and you will no longer even need to spend money on new filters once a year.  Just wash that one and reuse it.

 

Airaid Air Intake Tube

When you want to put a spring into the step of your engine, there is no easier way to do it than with the air intake tubes that are made by Airaid.  These tubes are incredibly wide so you know your engine will be getting loads of cleaner and colder air so that the combustion is more efficient.

These tubes have been made from polyethylene that is high density and cross linked.  They have an inner surface that is smooth and this moves as much as 400 cfm while also keeping the air cooler.  

With this kind of air flow your engine will no longer be lagging!  The installation is simple and only requires a few everyday tools and Airaid includes all of the bolts and mounting clamps that are necessary for the installation.

These air intake tubes will work great with your factory installed intake system or one of the ones that are made by Airaid.  They are made in the USA and come with a lifetime warranty.

When you give your engine more air, it translates into more acceleration, torque and horsepower.  These tubes are vehicle specific too so as long as you get the one that was made for your rig then you will get the ideal fit, form and function.

Features at a Glance

·         Airaid makes their air intake tubes with pride right here in the USA

·         These intake tubes come to you complete with a warranty that is good for a lifetime

·         With one of these intake tubes in your rig, you will finally be able to ditch those factory installed tubes that are so restrictive and experience what free lowing power feels like

·         Because these are vehicle specific parts, you will get fit, form and function that can’t be beat

·         These intake tubes can provide your engine with as much as 400 cfm of cooler, cleaner air so that the combustion in your engine will be more efficient

·         These tubes have been made from polyethylene that is high density and cross linked and the inner surface of the tubes is smooth which allows for the air to remain at a cooler temperature

·         These tubes are easily installed with everyday tools in just a matter of minutes

·         They come to you complete with everything that you will need in order to complete the installation safely and properly

Please Note: Check with your state to see what the regulations are for emissions.  While CARB exempt products might be legal for you to use in any state, parts that are not CARB exempt can’t be used in some states.  Before you buy any intake or exhaust system parts it is important to know what is legal in your state.

Airaid Drop In Air Filter

The drop in air filters that are made by Airaid install right into your factory installed air box and these drop in filters are meant to be a replacement for your standard paper filters.  These filters have been made from the same high quality materials that are utilized in the cold air intake kits that are also made by Airaid.  They offer you improvements that are significant in areas like filtration and air flow while they are also able to be washed out and used again!  What do you think?  Does it make sense to go and spend your hard earned money on a new air filter every time your old paper one gets dirty?  Wouldn’t you rather go ahead and choose the eco-friendlier Airaid premium filter that you can use over and over again?  This will give you significant long term savings.  While the Airaid filter does cost about twice as much as your paper ones do, you will only need to buy a single one as opposed to dozens over the years.

These filters do not require any sort of modifications to be made to your intake system and they are just as easy to install as your paper ones.

Dirt Defense

Each one of the filters that are made by Airaid has been built by hand and out of the highest quality materials that you will find on the market.  Also, they all come with a guarantee that is good for a lifetime.  These filters use many layers of cotton gauze that has been combined with Airaid’s filtration technology in order to make the best filtration system in the industry.  Each one of these filters traps even the tiniest particles of dirt that your normal paper filters just can’t catch.

Lifetime Guarantee

Each one of these filters has been made to last for as long as you need them to.  The body of the filter has been made from urethane that has been poured by hand.  It will not shrink or crack even in the environment that has as much heat as the area under your hood.  They are also washable and able to be reused.

These filters are the perfect way to replace those tired old paper filters with one that will efficiently increase the flow of air while also enhancing the filtration of that are so that your engine will perform better.

These filters are available in a dry version as well as in an oiled version.  Both versions are washable and reusable.  They feature a cone construction that is inverted so that the service intervals are extended. 

Features at a Glance

·         Made with pride in the USA

·         Comes with a lifetime warranty

·         Cone construction is uniquely inverted

·         Washable and reusable