SynthaMax OE Replacement Air Filter

Airaid filters are the absolute best air filters that are washable and able to be reused.  Each one of the Airaid SynthaMax replacement air filter has been hand - made and uses the best materials that are available.  These filters trap much more of the dirt, dust and debris than their competition does and they also provide you with an air flow that is superior so that you get a performance from your engine that is excellent.  These filters also come with a warranty that can’t be beat.

What makes these filters stand head and shoulders above the competition is that they use a filtration media that is unlike any other.  See, with the competitors’ filters, there is only a material such as cotton gauze that is used.  With an Airaid filter, there is the gauze as well as what they call SynthaFlow that is interlaced between the layers of gauze.  This proprietary material is able to capture even the smallest of particulates which would otherwise get through to your engine and slowly ruin its performance.  In fact, the filters that are made by Airaid are known for capturing twice as much of the 2 micron particulates as well as more than 6 times as much of the .2 micron particulates when compared to the competition.  This allows for your engine to run using air that is cleaner which in turn keeps it running more efficiently and with more power.

Features at a Glance

• Airaid makes their SynthaMax replacement air filters with pride right here in the USA
• These filters come to you complete with a warranty that is good for a lifetime
• These are quite simply the highest quality filters that are currently on the market
• These SynthaMax filters are able to be washed and reused
• The cotton gauze layers in these filters has been fused with the Airaid proprietary SynthaFlow material that is able to capture even the smallest particulates even when other filters can’t
• Depending on the application, the cotton gauze layers can also be lined with either a wire mesh that is coated with epoxy or with stainless steel
• With one of these filters, you will be able to revive your cold air intake system
• This filter has been designed specifically to replace your existing filter for your cold air intake
• These filters are composed of multiple layers in order to deliver the maximum amount of air flow as well as the ultimate protection for your engine
• The SynthaMax filters that are made by Airaid are dry, non – oiled filters.  They have a pair of layers of synthetic fiber that have been lined with stainless steel
• Because this is a reusable filter, you will never need to buy another one

Airaid Reviews: PowerAid Throttle Body Spacer

Do you want the ability to bolt on an instant upgrade in performance?  With the PowerAid Throttle Body Spacer that is made by Airaid you can do just that.  This throttle body spacer utilizes a design that is unique and is created from materials that are top quality in order to enhance the mixing capabilities for air and fuel.  This means that you get a higher efficiency in your engine as well as a low end performance increase and more fuel efficiency.

This particular throttle body spacer has been made from billet aluminum and has a unique, helix shaped, dyno proven bore.  The helical design allows for the incoming air to spin as if it were a tornado.  The shape of the air flow allows for it to efficiently mix with the fuel which then thrusts a fuel – air mix that is ideally atomized into the combustion chamber.  With a combination this efficient, you will have a far better low end performance as well as fuel efficiency that is improved.

This throttle body spacer is easily bolted on to the engine in less than an hour and it comes with everything that is needed for installation.  It also comes with a warranty.

Features at a Glance

• Airaid makes their PowerAid throttle body spacer with pride right here in the USA
• This product does come to you complete with the Airaid No Hassle warranty that is good for a lifetime
• It also comes to you complete with everything that is necessary to complete the installation safely and properly
• With this throttle body spacer, you will be able to get a combustion that is more powerful
• The construction of this component is billet aluminum that is of an aircraft quality
• This throttle body spacer is vehicle specific which means that when you get the one that was built for your rig, you will get the ideal fit, form and function
• This is a throttle body spacer that has been designed with a bore that is helix shaped.  This shape makes a sort of tornado for the air coming from the intake in order to facilitate a more efficient mix of the air and fuel
• This spacer is easily installed in less than an hour with simple hand tools.  It installs between the intake manifold and the throttle body
• This spacer is meant to be used only with the intake system that was installed by the factory.  It is NOT meant for use with any aftermarket intake system

Airaid is constantly looking for innovative new ways to give you the ability to get more power from your engine and this is a great example.  Bolt it on and feel the difference!

MXP Cold Air Intake System with Oiled Filter

It doesn’t matter if you need it for hauling or towing, or if you just want more raw power than everyone else has, the intake systems that are made by Airaid will give you that power boost that you need.  These intake systems work to get more of the cooler air that your engine needs into it which then unleashes a vast amount of potential that was previously untapped.  You will get gains in fuel economy, horsepower and torque.

The inlet tubing that Airaid makes has been formed by mandrel.  It is finished inside and out with a powder coat so that you get a great flow as well as protection against corrosion and it also looks great.  The premium air filter is a direct fit part and it is reusable too.  This filter will ensure that your engine gets the leanest possible air.

This system is easy to install and the entire process from start to finish should only take about half an hour.  Also, you won’t need tools that are any more complicated than a screwdriver.  These intake kits have been designed to be vehicle specific so you know you will get the ideal fit, form and function.

Features at a Glance

• Airaid makes these MXP Cold Air Intake Systems with Oiled Filters with pride right here in the USA
• These systems do come to you complete with a warranty that is good for a lifetime
• With this system in your rig, you will be able to get an air flow that is supreme and this will give you gains in torque and horsepower
• These are vehicle specific which means that you will get the perfect fit, form and function
• The filters that come with these systems are also made by Airaid.  They are oiled and they are able to be washed and reused for as long as you own your rig
• There is also the option to get the SynthaMax filter which is basically the same filter just in a version that is not oiled
• This intake system comes in 2 designs:
  • The Quick Fit System will replace your factory installed air box with a filter that is high flow as well as a heat shield that will connect to your intake tube that was installed by the factory
  • The Quick Fit System complete with Intake Tube will replace your factory installed air box as well as the factory installed intake tube with a nylon cross link intake tube, heat shield and a high flow filter
• These systems are incredibly easy to install.  All you will need is a screwdriver and about a half hour to install it and you will be back on the road

Airaid Reviews: Jr. Intake Tube Kit

Air tends to be lazy and most of the time it will follow the path that offers it the least amount of resistance.  With the Jr. Intake Tube kit that is made by Airaid you will be giving it the easiest path to your engine that is available.

When more air gets to the engine in your rig, the result is more acceleration, torque and horsepower.  The Jr. Intake tubes that are made by Airaid are able to improve the flow of air by as much as 400 cfm when compared to the intake tubes that were installed by the factory.  These tubes have been made from a high density polypropylene that is cross linked and they straighten out the flow of air by giving it a smooth and unrestricted path that will increase the amount of cooler air that gets to your engine.

With the Jr. Intake tubes that are made by Airaid, you can get that additional torque and horsepower you want simply by using a few simple hand tools and taking a few minutes to complete the installation.  You will get all of the hardware as well as instructions.

Airaid makes these tubes for each specific make and model so you can rest assured that the fit, form and function will be great.  These tubes are not only compatible with the intake that was installed by the factory but it is also compatible with any of the Airaid aftermarket intake systems.

Features at a Glance

• Airaid makes the Jr. Intake Tube kits with pride right here in the USA
• These kits come to you complete with a warranty that is good for a lifetime
• The Jr. Intake tubes will enhance the flow of air that you get from your factory installed air box
• These kits come to you complete with all of the hardware that is necessary to install them safely and properly
• This does include highly detailed, step by step instructions for installation
• Installation can be completed in just a matter of minutes
• These intake tubes are compatible with most of the intake systems that are also made by Airaid
• With these tubes, your flow of air can be increased by as much as 400 cfm when compared to the tubes that were installed by the factory
• These kits are comprised of two parts – the intake tube as well as the air filter
• The intake tube has been roto – molded
• The filter is the drop in style which makes it incredibly easy to install and remove
• The filter can be used dry or oiled
• This filter is washable and can be reused
• When it comes to maintaining the filter, take it out, wash it and let it dry, oil it if necessary and then pop it back in

Jeep Maintenance 101

It doesn’t matter if you are just thinking about buying a cold air intake or if you already have one, it is always a good thing to know how to maintain one.  Air intakes can maximize the power of your rig but if you always want to have the best possible results, there are some tips regarding the air intake system that you might want to know.  Lucky you though, intake systems are not things that require too much money, time or work in order to make sure that they stay performing at their best.

An important thing to remember when getting a cold air intake system is that you want to get one that is low maintenance.  You will want one that carries a name that is well – known and trusted in the industry.  Something like the MXP system that is made by Airaid.  This is a system that has been designed to give you the best results while not requiring you to put in a lot of work.  When it comes to the intake system in your rig, the old adage – You get what you pay for – seriously comes into play.  If you happen to get one that is an off brand then the results that you get from it will not be what you could expect from a boss system like the MXP.  You will also probably be looking at maintenance that is more frequent as well as spending more money to keep it in working order.

The Most Important Part of Air Intake System Maintenance

Whether you believe it or not, the most important part of the process is in choosing the one that is right for your rig.  Regardless of the type that you get, there will be certain things that are required for maintenance.  These things include replacing and maybe even oiling the air filter on a regular basis.  The intake tubes themselves could also do with a bit of cleaning occasionally to make sure that the tubes look great.  Aside from that, there really isn’t much maintenance that is required to keep a cold air intake looking and running great.  

One thing to note is the filters.  With many of the intake systems that ae on the market, you simply need to go buy a new filter and then take the old one out to put the new one in.  Sounds easy, right?  It is.  But, it can also add up to you spending a lot of money over the years.  With a filter that is made by Airaid, you buy one filter and use it forever.  They are washable as well as reusable and come with a warranty that is good for a lifetime. 

How to Replace Your Jeep Air Filter

The air filter in your rig cleans all of the air that gets in to your engine.  This filter needs to be changed either every 20,000 miles or once a year.  That is, unless you have an Airaid filter.  If you have one of the premium Airaid filters then you will just need to wash it and then put it back in.  If you happen to drive in conditions that are sandy or dusty then you will need to do this on a more frequent basis.  Dirty air filters can cause you to lose up to 3 mpg depending on how you drive.  This means that by keeping the air filter in your Jeep clean, you can save up to 100 gallons of fuel each year!

Changing or cleaning your air filter can also cause there to be less of a strain on your engine.  They are easy to change too as there are essentially just three steps.  First you will need to open the casing for the air filter.  Then take out the old one and put the new one in.  Now close the casing and you are ready to roll!

Any part of your rig that takes in air or fluids from the outside environment needs to have a way to separate what will benefit your rig from what will not.  This is the whole reason for having fuel and air filters.  While these parts do require you to check and change them on a regular basis, they are one of the least expensive and easiest – as well as the most critical – maintenance type procedures that you can perform on your Jeep.  Changing the air filter in your Jeep on a regularly scheduled basis can significantly impact both the performance and the life of your engine.

Basic changing of a filter does not take very long at all – about 3 minutes.  It doesn’t cost a lot of money either.  This can send your Jeep down the trails renewed and refreshed.  Having an air filter that is clogged can cause our Jeep to exhibit poor performance as well as reducing the life of the engine.  Taking 5 minutes out of your day once a year can change all of that. 

Now, in all honesty you can take your rig to your local oil change shop and they can change it for you.  Why pay them to do this though when it is so easy to do it yourself?  Even a 5 year old can do this!  When you get someone else to do this for you they can charge up to $30!  That’s ridiculous!

Anyway, the next time you change your filter, replace your old one with an Airaid filter and you will no longer even need to spend money on new filters once a year.  Just wash that one and reuse it.

 

Airaid Air Intake Tube

When you want to put a spring into the step of your engine, there is no easier way to do it than with the air intake tubes that are made by Airaid.  These tubes are incredibly wide so you know your engine will be getting loads of cleaner and colder air so that the combustion is more efficient.

These tubes have been made from polyethylene that is high density and cross linked.  They have an inner surface that is smooth and this moves as much as 400 cfm while also keeping the air cooler.  

With this kind of air flow your engine will no longer be lagging!  The installation is simple and only requires a few everyday tools and Airaid includes all of the bolts and mounting clamps that are necessary for the installation.

These air intake tubes will work great with your factory installed intake system or one of the ones that are made by Airaid.  They are made in the USA and come with a lifetime warranty.

When you give your engine more air, it translates into more acceleration, torque and horsepower.  These tubes are vehicle specific too so as long as you get the one that was made for your rig then you will get the ideal fit, form and function.

Features at a Glance

·         Airaid makes their air intake tubes with pride right here in the USA

·         These intake tubes come to you complete with a warranty that is good for a lifetime

·         With one of these intake tubes in your rig, you will finally be able to ditch those factory installed tubes that are so restrictive and experience what free lowing power feels like

·         Because these are vehicle specific parts, you will get fit, form and function that can’t be beat

·         These intake tubes can provide your engine with as much as 400 cfm of cooler, cleaner air so that the combustion in your engine will be more efficient

·         These tubes have been made from polyethylene that is high density and cross linked and the inner surface of the tubes is smooth which allows for the air to remain at a cooler temperature

·         These tubes are easily installed with everyday tools in just a matter of minutes

·         They come to you complete with everything that you will need in order to complete the installation safely and properly

Please Note: Check with your state to see what the regulations are for emissions.  While CARB exempt products might be legal for you to use in any state, parts that are not CARB exempt can’t be used in some states.  Before you buy any intake or exhaust system parts it is important to know what is legal in your state.

Airaid Drop In Air Filter

The drop in air filters that are made by Airaid install right into your factory installed air box and these drop in filters are meant to be a replacement for your standard paper filters.  These filters have been made from the same high quality materials that are utilized in the cold air intake kits that are also made by Airaid.  They offer you improvements that are significant in areas like filtration and air flow while they are also able to be washed out and used again!  What do you think?  Does it make sense to go and spend your hard earned money on a new air filter every time your old paper one gets dirty?  Wouldn’t you rather go ahead and choose the eco-friendlier Airaid premium filter that you can use over and over again?  This will give you significant long term savings.  While the Airaid filter does cost about twice as much as your paper ones do, you will only need to buy a single one as opposed to dozens over the years.

These filters do not require any sort of modifications to be made to your intake system and they are just as easy to install as your paper ones.

Dirt Defense

Each one of the filters that are made by Airaid has been built by hand and out of the highest quality materials that you will find on the market.  Also, they all come with a guarantee that is good for a lifetime.  These filters use many layers of cotton gauze that has been combined with Airaid’s filtration technology in order to make the best filtration system in the industry.  Each one of these filters traps even the tiniest particles of dirt that your normal paper filters just can’t catch.

Lifetime Guarantee

Each one of these filters has been made to last for as long as you need them to.  The body of the filter has been made from urethane that has been poured by hand.  It will not shrink or crack even in the environment that has as much heat as the area under your hood.  They are also washable and able to be reused.

These filters are the perfect way to replace those tired old paper filters with one that will efficiently increase the flow of air while also enhancing the filtration of that are so that your engine will perform better.

These filters are available in a dry version as well as in an oiled version.  Both versions are washable and reusable.  They feature a cone construction that is inverted so that the service intervals are extended. 

Features at a Glance

·         Made with pride in the USA

·         Comes with a lifetime warranty

·         Cone construction is uniquely inverted

·         Washable and reusable

Grand Cherokee Air Intake Kit

The Jeep Grand Cherokee can use any of the intake systems that are made by Airaid but one of the most popular ones for this vehicle is the Cold Air Dam or CAD.  This intake has been engineered to be able to give your engine much larger amounts of air that is cooler in order to produce more torque and horsepower.  With this system, you will be able to keep your air filter in its factory installed position but you will get a boost because of the huge air inlet that is an open element and is protected by the CAD panels so that your engine will get a steady and free flowing stream of air.  These panels will be mounted right in your factory installed air box location where they will use all of the factory installed air inlet ducts while also adding more passages for cold air to the filter.  These panels also ensure that the filter is isolated from the air coming from the engine compartment because it seals to the bottom of the hood with weather stripping that is blade style.

Some of the CAD systems will connect right to the air intake tube that was installed by the factory while some of them will use a low restriction replacement tube. 

The premium air filters for these systems have a 360 degree conical shape and are able to be washed and reused.  These are not as restrictive as the typical paper air filter and you are assured of getting filtration that is superior. 

This air intake system is super easy to install and all you will need is common hand tools.  It has been made in the USA and comes to you with a lifetime warranty. 

Features at a Glance

·         These air intake systems are made by Airaid with pride right here in the USA

·         They come to you complete with a warranty that is good for a lifetime

·         With one of these intake systems in your Jeep Grand Cherokee, you will instantly get an increase in torque and horsepower

·         This will replace your air box that was installed by the factory as well as your filter and the intake tubing that was installed by the factory

·         These intake systems are incredibly easy to install using only simple hand tools

·         The air filter is a premium high flow filter

·          The filter is also washable and able to be reused

·         With this intake system in your Grand Cherokee, the air flow to your engine will be dramatically increased

·         Because of the increases to the torque and horsepower, the overall performance of your engine will be enhanced

·         This system will use part of the intake system that was installed by the factory in order to make installation easy

 

Airaid Reviews: Air Intake Tube Kit

With one of the air intake tubes that are made by Airaid, you will be able to give your engine a new life.  These air intake tubes are extra wide and as such, they get a ton of cleaner, cooler air right to you engine so that it can be used for a combustion that is more efficient.

These air intake tubes have been made from polyethylene tubing that is high density and cross linked.  The inner surface of the tube is smooth and this allows for it to move as much as 400 cfm of air.

Simply put, this amount of air flow can get you from lagging behind to zooming ahead in a matter of minutes.  Installation is simple too and it only requires a few everyday tools to complete.  These tubes come with everything that you will need to install them.

When you want to give you engine a severe boost, this is all it takes to accomplish that goal.  These tubes will work amazingly well with any of the performance intake systems that are made by Airaid or even with your factory installed one.  These tubes are made in the USA and come with a No Hassle lifetime warranty.

Air tends to be lazy and will typically follow along the path that offers it the least amount of resistance.  That being said, ease its way and give it an even easier path with one of these air intake tubes that are made by Airaid.

Features at a Glance

·         These air intake tubes are made with pride by Airaid right here in the USA

·         They come to you complete with a No Hassle warranty that is good for a lifetime

·         With these air intake tubes you will be able to get rid of those factory installed tubes that restrict the air flow and get power that is free flowing

·         These tubes are vehicle specific so as long as you get the one that was made for your rig, you will get the ideal fi, form and function

·         These tubes give you an air flow that is as much as 400 cfm so that you get a combustion that is more efficient

·         These tubs have been made from polyethylene tubing that is high density and cross linked.  The inner surface is smooth and this keeps the air at a cooler temperature

·         These tubes are easy to install and only require the use of simple, everyday tools

·         They come to you complete with everything that you will need in order to install them safely and properly

Please Note: It is important to verify the emissions regulations that are in place for your state to ensure that you stay compliant.

Airaid Cool Air Dam Intake System

The cool air dam intake system that is made by Airaid features a 360º large air filter – also made by Airaid – along with a massive air inlet that goes right in the OE location.  It is enclosed in a housing which works to seal it against the hood of your rig thereby shielding the filter from the heat coming off of the engine while also allowing for it to take in massive amounts of cooler air that has a higher density.  This cooler air contains more of the oxygen that is necessary for a combustion that is complete which then leads to you getting gains in things such as torque and horsepower as well as an overall improvement in the performance of the engine.

Features at a Glance

·         All of the cool air dam intake systems made by Airaid are made with pride right here in the USA

·         These cool air dam intake systems are backed by the signature No Hassle Airaid warranty

·         Using only simple hand tools, these intake systems can be installed in less than an hour and require no fabrication, cutting or drilling

·         Each one of these intake systems comes to you complete with all of the parts that you will need for a safe and complete installation including installation instructions that are quite comprehensive

·         Each one of these cool air dam intake systems made by Airaid is available with an air inlet tube made from molded polyurethane if you choose

·         Each one of these intake systems comes to you complete with one of the innovative and highly advanced SynthaMax or SynthaFlow air filters – also made by Airaid

·         The cool air dam intake systems made by Airaid have been designed by CAD and then dyno tested and proven for every application that it is meant for

·          With the installation of this system in your rig you will immediately get gains in torque and horsepower.  You will also get an overall performance that is improved

·         Because this system has isolated the air filter from the heat coming off of the engine, it is able to get more amounts of denser and cooler air to the engine

·         This system also increases the sheer volume of air that gets to your engine

When you increase the amount of air that gets to your engine you will automatically get gains in torque and horsepower.  However, if that increase includes air that is cooler and therefor denser, you will get even more power from your engine!  The cooler and denser the air is, the more oxygen molecules it contains.  More oxygen makes for a more complete combustion which then results in a more massive output from your engine.

 

Airaid Air Filter Wrap

The filter wraps made by Airaid are also called pre-filters.  These pre-filters are constructed from a filtration material that is of the highest grade available.  These unique pre-filters work great in providing an additional layer of filtration for your intake system’s air filter.  With this easily installed and affordable pre-filter you can get a longer life and more protection for your system.

The pre-filters made by Airaid are highly recommended in applications that include being used in extremely dirt conditions.  These filter wraps are constructed from a polyester material that is both durable and resistant to water.  It features micro openings that work to filter out any sort of debris that is 5 microns or larger.  These filter wraps have been both flow bench and dyno tested and proven to not constrict either the flow of air or the amount of power available.

Features at a Glance

·         The filter wraps made by Airaid are made with pride right here in the USA

·         You get extreme protection from a pre-filter that is resistant to water

·         With the use of these filter wraps you can double the amount of time between filter cleanings

·         These pre-filters are available for a vast array of intake system filters

·         The filter wraps feature a unique cone shape

 We all know that it is pretty simple to change an air filter.  The thing is, we may not remember exactly when it is time to change it, right?  With these filters wraps made by Airaid, it doesn’t matter if you forget the exact time you need to change your air filter.  With these innovative pre-filters that Airaid makes you can go more than twice the amount of time between your filter changing or cleaning.

Since Airaid is all about intake systems and since they have redefined air filters, they really do know what they are doing when it comes to both of these things.  With the air filers made by Airaid, you don’t really need to change them anyway…simply wash them and re-oil them when they get dirty.  Then pop them back in and you are good to go.  If you have an Airaid filter then you are already aware of this. 

If you don’t already have an Airaid filter, you are wasting your money by going out and buying a new filter every time it needs to be changed.  Don’t worry though, these filter wraps more than likely come in a size to fit what you are running with.  Honestly though, if you are going to go with a filter wrap made by Airaid, why wouldn’t you also get the filter to go with it?

Seriously, try them out and you will never go with a non-Airaid filter or filter wrap again.